See if this sounds familiar: Your shower starts out great and you’re enjoying the hot water, but a few minutes in, you find yourself standing in a small lake of soapy, dirty water. Quite the unpleasant and unwelcome surprise! If you find yourself in this situation, before you call a plumber in Toronto, check out these three remedies you can try on your own to get your drain flowing again.
Grab some gloves
The most common cause of drain blockage by far is hair. We all shed a lot of hair when we shower, whether it’s long or short, and after a while, it can get caught and build up in the drainpipe. (Pro tip: Investing in a simple hair catcher will help you avoid this yucky situation in the future.)
For this first fix, put on a pair of rubber gloves and dive in. No special equipment is needed here—just reach your fingers as far as you can into the shower drain and see if you can find any clumps of hair. Gently pull out as much as you can find. If you pull hard and fast, you might break off the hair, making it that much harder to retrieve.
Get a plunger
If you’ve removed the hair in your drain and it still isn’t draining—or if you didn’t find any hair within reach—it’s time for plan B: a plunger. Plungers work by pushing clogs down the pipes and out of your drain system, and they can be quite effective in this situation. Simply put the center of the plunger directly over your drain, and then push down and pull up firmly. You’ll hear a suction noise, which means you’re doing a good job. Run the water afterwards to see if you’ve solved the problem.
If you’ve tried both of the ideas above with no success, there is a third option: a chemical agent. This isn’t something you should try before exhausting your other options, because chemicals can have a damaging effect, especially on old pipes. A good de-clogging agent can work wonders in a tight bind, but try to avoid pouring any chemicals down your drain on a regular basis.
There are many brands of chemicals that will do the job, and you can find them at your local grocery or hardware store. Make sure to read the bottle and pick one that says it is specifically for unclogging sinks or other household drains.
Pour half of the bottle into your drain and then wait for about half an hour. Afterward, flush the drain with a good amount of hot water, and make sure that no leftover chemicals remain in the pipes, as this can lead to corrosion, leakage and permanent damage. Take a deep breath and run the water again to see if the clog has cleared.
Call for help
Sometimes a home fix just won’t cut it—the clog could be too large, or it could be located too far down the pipes for you to get to with the fixes above. In that case, call a trustworthy plumber in Toronto, such as Rooter Group Inc., to come and bail you out!